Home / Services
Services
Wyvern Construction, LLC does cosmetic improvements, and does them thoroughly: the floor, the tile, the paint and the moulding that ties a room together.
Wyvern Construction, LLC sands and refinishes solid hardwood floors and stairways in Silver City and across Grant County. Evan Humphrey guarantees the work: if there is ever an issue with it, he comes back and fixes it at no cost.
A good quality solid hardwood floor can be refinished many times. That is the reason solid wood lasts 50 to 100 years or more when it is taken care of. If the boards under the wear are sound, refinishing brings back the floor you already own.
If your home has solid wood under carpet or under a tired finish, it is usually worth saving.
Solid hardwood can be sanded and refinished. Most engineered hardwood has a thin wear layer and a hard aluminum oxide finish, so refinishing it is usually not advisable. Fossilized bamboo and eucalyptus cannot be sanded like traditional hardwood: damaged planks are replaced, or the surface is polished or re-coated.
Not sure what you have? Send a photo or call, and Evan will tell you what he sees.



Solid hardwood can be sanded and refinished, often many times over its life. Most engineered hardwood is not advisable to refinish because the wear layer is thin, and fossilized bamboo or eucalyptus cannot be sanded like traditional hardwood.
Yes. Wyvern Construction, LLC refinishes hardwood stairways along with floors. A client review on this site describes a refinished floor and stairway with new moulding.
In Evan’s experience, solid hardwood lasts 50 to 100 years or more if it is taken care of, because it can be refinished to extend its life.
Wyvern Construction, LLC installs solid hardwood floors in Silver City and Grant County, working with both unfinished and pre-finished wood. Evan Humphrey is there start to finish: consultation, demolition of the old floor, preparation and installation.
Solid tongue and groove flooring lends itself to unique and creative patterns. Evan frames hearths, tile insets and other permanent fixtures with mitered borders, and can run a contrasting inlay strip or a pattern through the main body of the floor.
The photos on this page show that work: a light inlay border through a great room, planks mitered around an eight-sided hearth, and hardwood framed around a tile entry.
Solid hardwood starts at about $5 per square foot for material, and the more exotic the species, the more it costs. Maple and oak are among the most commonly used. Some species are softer or less water resistant than others, so the room matters as much as the look.
It often takes a similar amount of labor to install a poor quality floor as a top of the line one. In most cases it is prudent to spend the money once.



In Evan’s experience, solid hardwood material runs $5 and up per square foot, and more for exotic species. Installation labor is quoted per project after a visit.
Yes. Solid tongue and groove flooring allows custom patterns, including mitered borders around tile and hearths and contrasting inlay strips. Examples are in the gallery.
Yes. Wyvern Construction, LLC handles demolition and preparation as part of the job. One client review describes removing an old, many layered floor before the new one went in.
Wyvern Construction, LLC installs fossilized bamboo and eucalyptus flooring in Silver City and Grant County, and can supply it at wholesale pricing from suppliers including Cali Bamboo. Evan calls it his personal favorite floor: extremely hard, virtually waterproof and made to last 50 to 100 years or more.
The fossilization process makes the planks extremely hard and durable, even harder than the hardest hardwoods. It is still real wood, so each plank is unique, and it is a sustainable, environmentally friendly material that is more readily available than traditional hardwoods.
Material runs about $5 to $8 per square foot. Considering how long these floors last, that is cost effective.
This floor cannot be sanded like traditional hardwood. If damage is severe, individual planks are replaced. Otherwise the surface can be repaired by polishing or re-coating with a special aluminum oxide finish, and minor scratches can be filled with a colored wax filler.
Evan also works with bamboo plank and cork flooring. Ask to see samples.

Yes. The fossilization process makes bamboo and eucalyptus planks extremely hard, even harder than the hardest hardwoods, and they will not dent in normal use.
It cannot be sanded like traditional hardwood. Severely damaged planks are replaced, and lighter wear can be repaired by polishing or re-coating with a special aluminum oxide finish.
In Evan’s experience the material runs $5 to $8 per square foot, with a life of 50 to 100 years or more if taken care of.
Wyvern Construction, LLC installs ceramic tile floors in Silver City and Grant County, from small hexagon mosaics to large format tile, and removes old tile when a room is changing to a new floor.
A tile floor is judged by its lines: where the pattern starts, how the cuts land at the walls, and whether every edge sits flat with the next. Tile is set with leveling clips, and the layout is planned before the first piece goes down.
Tile and hardwood meet in a lot of Southwest homes, at entries, hearths and kitchens. Evan installs both, so the transition gets designed instead of patched: a mitered wood frame around a tile inset, or a border where the two floors meet.



Yes. Demolition is part of the job. One client review describes Evan and his associate removing ceramic tile and installing a new floor in its place.
Wyvern Construction, LLC installs ceramic tile floors, and the gallery shows a hexagon mosaic floor and large format kitchen tile. Because Evan is not a licensed contractor, plumbing and structural work are outside what he offers.
Wyvern Construction, LLC paints home interiors in Silver City and Grant County: walls, accent walls, built-in shelves and niches, doors and trim. Painting can be done alongside a new floor, so the room is finished in one project.
The painting in the gallery leans into color: deep teal built-ins against cream walls, a red accent wall with a warm yellow room, soft blue under a vaulted ceiling. Clean lines where two colors meet are what make bold color look intended.
New floors usually mean new baseboards, and new baseboards mean paint. Having one business install the floor, fit and finish the trim, and paint the walls avoids the gaps and touch-ups that come from three crews working around each other.



Evan’s site describes interior painting. Ask him directly about anything outside.
Yes. One client review describes adding painting to a flooring project already under way, quoted and completed by the same crew.
Wyvern Construction, LLC finishes and installs baseboard, window and door casing, crown and other high end moulding in Silver City and Grant County. Evan Humphrey grew up helping his father, a master craftsman and timber-framer in Alaska, and trim is where that training shows.
Silver City homes are rarely square. Adobe and plaster walls curve, corners are rounded, and floors rise and fall. One client hired Evan to fit baseboards to rounded walls in three rooms. Another described a complex trim installation that required precision cutting and placement.
Evan finishes moulding as well as installing it, so stain or paint is even on every face and the joints are tight when it goes up.



Yes. A client review on this site describes baseboards fitted to rounded walls in a living room, kitchen and dining room.
Yes. Wyvern Construction, LLC finishes and installs baseboard, window and door casing, crown and other types of high end moulding.
Wyvern Construction, LLC installs luxury vinyl plank, engineered hardwood and laminate flooring in Silver City and Grant County, and helps you pick a product that will last. Vinyl plank is 100% waterproof and suits kitchens and wet rooms. Engineered hardwood gives a real wood surface over a concrete slab. Laminate fits a tight budget in dry, level, low traffic rooms.
Vinyl plank ($2 to $4 per square foot for material, 25 to 50 years) is generally a superior product to laminate. Choose a thick plank with a thick wear layer: thicker planks usually have stronger joints. Mohawk, Lifeproof and Cali Bamboo all sell quality vinyl plank.
Engineered hardwood ($3 to $5 per square foot, 25 to 50 years) is a real wood veneer over a plywood or fiberboard core. Its thin wear layer is the trade-off.
Laminate ($1 to $3 per square foot, 10 to 25 years) is the least expensive. Evan usually recommends Pergo, or otherwise a thicker, water resistant product.
Clients have hired Evan for close to 1,000 square feet of luxury vinyl plank in a rental building and for 1,400 square feet of laminate with matching baseboards in the Mimbres Valley. Both reviews are on this site.



Generally speaking, vinyl plank is a superior product to laminate. It is 100% waterproof and flexible, so it handles wet areas and uneven floors better. It also usually costs more.
Vinyl plank, because it is impervious to water. Most laminates are not appropriate for rooms where water regularly contacts the floor.
In Evan’s experience, vinyl plank material runs $2 to $4 per square foot and lasts 25 to 50 years. Installation is quoted per project.
Start your project
Call, text or email for a rough estimate. A detailed bid includes a visit to your home in Silver City or Grant County.